WELCOME TO THE CAR GALLERY

Page 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23

John Kirks 68

John kirkCutlass has seen lots of action in numerous big buck bracket events. John is a seasoned hard core bracket racer for over 25 years. John campains this awesome 68 at such tracks as Cecil county Maryland, Atco New Jersey and Maple grove raceway in Mohnton Pennsylvania. Johns power comes from a 482 inch Edelbrock headed big block. John utilizes many featured products as seen here on our web site. Custom roller cam, Performance cam bearings, Billet rail valve covers, and gaskets.

John Zeruchas 8 second 70

John Zerucha Skylark resizedSkylark seen here just before entering the water box. Johns power comes from a normally aspirated, single four big block buick. Custom engine design work was provieded to John by Andy Miller. Miller has been working closely with John on the engine design since the later part of the 03 season. Custom components such as CP pistons, GRP rods, ATI damper and crank trigger system were all provided. Expect this ride to crank out mph readings that exceed 155 in the quarter.

Kevins 79 Cutlass

Kevins 79 cutlass 1Kevin is a regular at Gainsville raceway. Kevins Oldsmobile is powered by a 350 small block Olds. Not only has Kevins car been seen in many final round appearances but he also uses this car as a dialy driver. Kevins 350 sports the new billet rail valve covers offered by Oldsmobile Performance Products.


Page 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23